NX CAM POSTPROCESSOR

Mazak HCN 10800

Download / Get a quote

Postprocessor for Siemens NX CAM, set up for the Mazak HCN 10800 4-axis machining center with Mazatrol Smooth control. Configured to your machine options and reviewed before delivery.

Siemens NXMazatrol Smooth4-axis millingAxes XYZB

AxesXYZB

Machine typeMachining center

ControlMazatrol Smooth

CAM softwareSiemens NX

Add NX machine simulation

Configured to your machine
Technical review before delivery

Machine Type: Milling
Vendor: Mazak
Axis: XYZB
Version: 1.1

Machine data

Source: Mazak — HCN-10800 specifications (www.mazak.com, checked Oct 28, 2026). Values can differ by machine option.

MACHINE

Axis travel: X 1700 mm · Y 1400 mm · Z 1525 mm
Max spindle speed: 10000 rpm
Tool shank: BT50, CAT No.50
Table / pallet: 1000 mm × 1000 mm
Tool storage capacity: 80

POSTPROCESSOR

CAM software: Siemens NX CAM
Controller: Mazatrol Smooth (EIA/ISO output)
Machining: 3-axis plus rotary-axis machining
Units: Metric or inch

NC output on Mazatrol Smooth

Standard Mazatrol Smooth codes for this machine type.

G54–G59: Work offsets
G81–G89: Drilling canned cycles

Exact codes and options are confirmed against your machine during technical review.

What you get

Configured postprocessor

Set up for the Mazak HCN 10800 and its Mazatrol Smooth control, ready to use in NX CAM.

Technical review

Machine options and NC conventions confirmed with you before delivery.

Optional NX simulation

NX ISV/CSE machine simulation built on the same machine configuration.

How it works

Send your machine detailsController version, options and a sample NC program if you have one.
Review and quoteOptiTech confirms the scope and replies with a price.
DeliveryPostprocessor, setup notes and support within the agreed scope.

Frequently asked questions

Which CAM software is this postprocessor for?

Siemens NX CAM only.

Which codes does the post output on Mazatrol Smooth?

Standard Mazatrol Smooth codes for this machine type. Work offsets: G54–G59; Drilling canned cycles: G81–G89. Exact codes and options are confirmed against your machine during technical review.

Can the post be adapted to my machine options and shop standards?

Yes, within the agreed scope. Send your controller version, machine options (for example probing or rotary-axis limits) and a sample NC program. OptiTech reviews the configuration before quoting.

How do I get this postprocessor?

Click "Get a quote" on this page and describe your machine and controller. OptiTech replies with the scope and price after technical review.