NX CAM POSTPROCESSOR

Hurco VMX50i

Download / Get a quote

Postprocessor for Siemens NX CAM, set up for the Hurco VMX50i 3-axis machining center with Hurco WinMax control. Configured to your machine options and reviewed before delivery.

Siemens NXHurco WinMax3-axis millingAxes XYZ

AxesXYZ

Machine typeMachining center

ControlHurco WinMax

CAM softwareSiemens NX

Add NX machine simulation

Configured to your machine
Technical review before delivery

Machine Type: Milling
Vendor: Hurco
Axis: XYZ
Version: 1.1

Machine data

Source: Hurco — VMX 50i specifications (www.hurco.eu, checked Oct 28, 2026). Values can differ by machine option.

MACHINE

Axis travel: X 1270 mm · Y 660 mm · Z 610 mm
Max spindle speed: 12000 rpm (SK40); 8000 rpm (SK50)
Tool shank: SK40 or SK50 (DIN 69871 A)
Table / pallet: 1500 x 660 mm
Tool storage capacity: 30 / 40 (SK40); 30 (SK50)

POSTPROCESSOR

CAM software: Siemens NX CAM
Controller: Hurco WinMax
Machining: 3-axis milling and drilling
Units: Metric or inch

NC output on Hurco WinMax

Standard Hurco WinMax codes for this machine type.

G54–G59: Work offsets
G81–G89: Drilling canned cycles

Exact codes and options are confirmed against your machine during technical review.

What you get

Configured postprocessor

Set up for the Hurco VMX50i and its Hurco WinMax control, ready to use in NX CAM.

Technical review

Machine options and NC conventions confirmed with you before delivery.

Optional NX simulation

NX ISV/CSE machine simulation built on the same machine configuration.

How it works

Send your machine detailsController version, options and a sample NC program if you have one.
Review and quoteOptiTech confirms the scope and replies with a price.
DeliveryPostprocessor, setup notes and support within the agreed scope.

Frequently asked questions

Which CAM software is this postprocessor for?

Siemens NX CAM only.

Which codes does the post output on Hurco WinMax?

Standard Hurco WinMax codes for this machine type. Work offsets: G54–G59; Drilling canned cycles: G81–G89. Exact codes and options are confirmed against your machine during technical review.

Can the post be adapted to my machine options and shop standards?

Yes, within the agreed scope. Send your controller version, machine options (for example probing or rotary-axis limits) and a sample NC program. OptiTech reviews the configuration before quoting.

How do I get this postprocessor?

Click "Get a quote" on this page and describe your machine and controller. OptiTech replies with the scope and price after technical review.