NX CAM POSTPROCESSOR

Hurco TM12Mi

Download / Get a quote

Postprocessor for Siemens NX CAM, set up for the Hurco TM12Mi 3-axis mill-turn center with Hurco WinMax control. Configured to your machine options and reviewed before delivery.

Siemens NXHurco WinMax3-axis mill-turnAxes XZC

AxesXZC

Machine typeMill-turn center

ControlHurco WinMax

CAM softwareSiemens NX

Add NX machine simulation

Configured to your machine
Technical review before delivery

Machine Type: Mill-Turn
Vendor: Hurco
Axis: XZC
Version: 1.1

Machine data

Source: Hurco — TM 12Mi specifications (www.hurco.eu, checked Oct 28, 2026). Values can differ by machine option.

MACHINE

Axis travel: X 305 mm · Z 1016 mm
Max spindle speed: 2800 rpm
Rotary tool spindle: 4000 rpm
Max machining diameter: 360 mm
Chuck size: 315 mm
Turret tool stations: 12 (VDI 50)

POSTPROCESSOR

CAM software: Siemens NX CAM
Controller: Hurco WinMax
Machining: Turning plus C-axis milling
Units: Metric or inch

NC output on Hurco WinMax

Standard Hurco WinMax codes for this machine type.

G96 / G97: Constant surface speed / direct spindle speed
G71 / G70: Rough and finish turning cycles
G76: Threading cycle
G12.1 / G07.1: Polar and cylindrical interpolation for C-axis milling

Exact codes and options are confirmed against your machine during technical review.

What you get

Configured postprocessor

Set up for the Hurco TM12Mi and its Hurco WinMax control, ready to use in NX CAM.

Technical review

Machine options and NC conventions confirmed with you before delivery.

Optional NX simulation

NX ISV/CSE machine simulation built on the same machine configuration.

How it works

Send your machine detailsController version, options and a sample NC program if you have one.
Review and quoteOptiTech confirms the scope and replies with a price.
DeliveryPostprocessor, setup notes and support within the agreed scope.

Frequently asked questions

Which CAM software is this postprocessor for?

Siemens NX CAM only.

Which codes does the post output on Hurco WinMax?

Standard Hurco WinMax codes for this machine type. Constant surface speed / direct spindle speed: G96 / G97; Rough and finish turning cycles: G71 / G70; Threading cycle: G76; Polar and cylindrical interpolation for C-axis milling: G12.1 / G07.1. Exact codes and options are confirmed against your machine during technical review.

Can the post be adapted to my machine options and shop standards?

Yes, within the agreed scope. Send your controller version, machine options (for example probing or rotary-axis limits) and a sample NC program. OptiTech reviews the configuration before quoting.

How do I get this postprocessor?

Click "Get a quote" on this page and describe your machine and controller. OptiTech replies with the scope and price after technical review.