NX CAM POSTPROCESSOR

Matsuura MX420

Download / Get a quote

Postprocessor for Siemens NX CAM, set up for the Matsuura MX420 5-axis machining center with FANUC control. Configured to your machine options and reviewed before delivery.

Siemens NXFANUC5-axis millingAxes XYZAC

AxesXYZAC

Tilted planeG68.2

Tool-tip controlG43.4

CAM softwareSiemens NX

Add NX machine simulation

Configured to your machine
Technical review before delivery

Machine Type: Milling
Vendor: Matsuura
Axis: XYZAC
Version: 1.1

Machine data

Source: Matsuura — MX-420 PC10 specifications (www.matsuurausa.com, checked Oct 28, 2026). Values can differ by machine option.

MACHINE

Axis travel: X 435 mm · Y 465 mm · Z 560 mm
Rotary / tilt axes: A: -125° to +10°; C: 360°
Max spindle speed: 15000 rpm
Tool shank: BT40
Table / pallet: Ø130 mm working surface (Capto C6 pallets)
Tool storage capacity: 90
CNC: Matsuura G-Tech 31i

POSTPROCESSOR

CAM software: Siemens NX CAM
Controller: FANUC
Machining: 3+2 and simultaneous 5-axis
Units: Metric or inch

NC output on FANUC

Standard FANUC codes for this machine type.

G54–G59: Work offsets
G68.2: Tilted plane for 3+2 positioning
G43.4: Tool-tip control for simultaneous 5-axis
G81–G89: Drilling canned cycles

Exact codes and options are confirmed against your machine during technical review.

What you get

Configured postprocessor

Set up for the Matsuura MX420 and its FANUC control, ready to use in NX CAM.

Technical review

Machine options and NC conventions confirmed with you before delivery.

Optional NX simulation

NX ISV/CSE machine simulation built on the same machine configuration.

How it works

Send your machine detailsController version, options and a sample NC program if you have one.
Review and quoteOptiTech confirms the scope and replies with a price.
DeliveryPostprocessor, setup notes and support within the agreed scope.

Frequently asked questions

Which CAM software is this postprocessor for?

Siemens NX CAM only.

Which codes does the post output on FANUC?

Standard FANUC codes for this machine type. Work offsets: G54–G59; Tilted plane for 3+2 positioning: G68.2; Tool-tip control for simultaneous 5-axis: G43.4; Drilling canned cycles: G81–G89. Exact codes and options are confirmed against your machine during technical review.

Can the post be adapted to my machine options and shop standards?

Yes, within the agreed scope. Send your controller version, machine options (for example probing or rotary-axis limits) and a sample NC program. OptiTech reviews the configuration before quoting.

How do I get this postprocessor?

Click "Get a quote" on this page and describe your machine and controller. OptiTech replies with the scope and price after technical review.