NX CAM POSTPROCESSOR

Doosan Puma MX2600ST

Download / Get a quote

Postprocessor for Siemens NX CAM, set up for the Doosan Puma MX2600ST 5-axis mill-turn center with FANUC control. Configured to your machine options and reviewed before delivery.

Siemens NXFANUC5-axis mill-turnAxes XYZBC

AxesXYZBC

Tilted planeG68.2

Tool-tip controlG43.4

CAM softwareSiemens NX

Add NX machine simulation

Configured to your machine
Technical review before delivery

Machine Type: Mill-Turn
Vendor: Doosan
Axis: XYZBC
Version: 1.1

Machine data

The manufacturer's current website does not list specifications for this model. Send your machine's data sheet with the quote request and OptiTech will confirm the configuration.

POSTPROCESSOR

CAM software: Siemens NX CAM
Controller: FANUC
Machining: Turning plus B-axis milling (3+2 and simultaneous 5-axis)
Units: Metric or inch

NC output on FANUC

Standard FANUC codes for this machine type.

G96 / G97: Constant surface speed / direct spindle speed
G71 / G70: Rough and finish turning cycles
G76: Threading cycle
G12.1 / G07.1: Polar and cylindrical interpolation for C-axis milling
G68.2 / G43.4: Tilted plane and tool-tip control for B-axis milling

Exact codes and options are confirmed against your machine during technical review.

What you get

Configured postprocessor

Set up for the Doosan Puma MX2600ST and its FANUC control, ready to use in NX CAM.

Technical review

Machine options and NC conventions confirmed with you before delivery.

Optional NX simulation

NX ISV/CSE machine simulation built on the same machine configuration.

How it works

Send your machine detailsController version, options and a sample NC program if you have one.
Review and quoteOptiTech confirms the scope and replies with a price.
DeliveryPostprocessor, setup notes and support within the agreed scope.

Frequently asked questions

Which CAM software is this postprocessor for?

Siemens NX CAM only.

Which codes does the post output on FANUC?

Standard FANUC codes for this machine type. Constant surface speed / direct spindle speed: G96 / G97; Rough and finish turning cycles: G71 / G70; Threading cycle: G76; Polar and cylindrical interpolation for C-axis milling: G12.1 / G07.1; Tilted plane and tool-tip control for B-axis milling: G68.2 / G43.4. Exact codes and options are confirmed against your machine during technical review.

Can the post be adapted to my machine options and shop standards?

Yes, within the agreed scope. Send your controller version, machine options (for example probing or rotary-axis limits) and a sample NC program. OptiTech reviews the configuration before quoting.

How do I get this postprocessor?

Click "Get a quote" on this page and describe your machine and controller. OptiTech replies with the scope and price after technical review.