NX CAM POSTPROCESSOR

Doosan Puma 3100LSY

Download / Get a quote

Postprocessor for Siemens NX CAM, set up for the Doosan Puma 3100LSY 4-axis mill-turn center with FANUC control. Configured to your machine options and reviewed before delivery.

Siemens NXFANUC4-axis mill-turnAxes XYZC

AxesXYZC

Machine typeMill-turn center

ControlFANUC

CAM softwareSiemens NX

Add NX machine simulation

Configured to your machine
Technical review before delivery

Machine Type: Mill-Turn
Vendor: Doosan
Axis: XYZC
Version: 1.1

Machine data

Source: Doosan — PUMA 3100LSY specifications (www.dn-solutions.com, checked Oct 28, 2026). Values can differ by machine option.

MACHINE

Axis travel: X 293 mm · Y 130 mm · Z 1350 mm
Max spindle speed: 3000 rpm (main); 4000 rpm (sub)
Rotary tool spindle: 5000 rpm
Max machining diameter: 420 mm
Chuck size: 12"
Turret tool stations: 12

POSTPROCESSOR

CAM software: Siemens NX CAM
Controller: FANUC
Machining: Turning plus C-axis and Y-axis milling
Units: Metric or inch

NC output on FANUC

Standard FANUC codes for this machine type.

G96 / G97: Constant surface speed / direct spindle speed
G71 / G70: Rough and finish turning cycles
G76: Threading cycle
G12.1 / G07.1: Polar and cylindrical interpolation for C-axis milling

Exact codes and options are confirmed against your machine during technical review.

What you get

Configured postprocessor

Set up for the Doosan Puma 3100LSY and its FANUC control, ready to use in NX CAM.

Technical review

Machine options and NC conventions confirmed with you before delivery.

Optional NX simulation

NX ISV/CSE machine simulation built on the same machine configuration.

How it works

Send your machine detailsController version, options and a sample NC program if you have one.
Review and quoteOptiTech confirms the scope and replies with a price.
DeliveryPostprocessor, setup notes and support within the agreed scope.

Frequently asked questions

Which CAM software is this postprocessor for?

Siemens NX CAM only.

Which codes does the post output on FANUC?

Standard FANUC codes for this machine type. Constant surface speed / direct spindle speed: G96 / G97; Rough and finish turning cycles: G71 / G70; Threading cycle: G76; Polar and cylindrical interpolation for C-axis milling: G12.1 / G07.1. Exact codes and options are confirmed against your machine during technical review.

Can the post be adapted to my machine options and shop standards?

Yes, within the agreed scope. Send your controller version, machine options (for example probing or rotary-axis limits) and a sample NC program. OptiTech reviews the configuration before quoting.

How do I get this postprocessor?

Click "Get a quote" on this page and describe your machine and controller. OptiTech replies with the scope and price after technical review.