NX CAM POSTPROCESSOR

Haas VF6/50 TR

Download / Get a quote

Postprocessor for Siemens NX CAM, set up for the Haas VF6/50 TR 5-axis machining center with Haas control. Configured to your machine options and reviewed before delivery.

Siemens NXHaas5-axis millingAxes XYZAC

AxesXYZAC

Tilted planeG254

Tool-tip controlG234

CAM softwareSiemens NX

Add NX machine simulation

Configured to your machine
Technical review before delivery

Machine Type: Milling
Vendor: Haas
Axis: XYZAC
Version: 1.1

Machine data

Source: Haas — VF-6/50TR specifications (www.haascnc.com, checked Oct 28, 2026). Values can differ by machine option.

MACHINE

Axis travel: X 1626 mm · Y 813 mm · Z 762 mm
Tool shank: 50-taper

POSTPROCESSOR

CAM software: Siemens NX CAM
Controller: Haas
Machining: 3+2 and simultaneous 5-axis
Units: Metric or inch

NC output on Haas

Standard Haas codes for this machine type.

G54–G59: Work offsets
G254: Dynamic work offset (DWO) for 3+2 positioning
G234: Tool center point control (TCPC)
G81–G89: Drilling canned cycles

Exact codes and options are confirmed against your machine during technical review.

What you get

Configured postprocessor

Set up for the Haas VF6/50 TR and its Haas control, ready to use in NX CAM.

Technical review

Machine options and NC conventions confirmed with you before delivery.

Optional NX simulation

NX ISV/CSE machine simulation built on the same machine configuration.

How it works

Send your machine detailsController version, options and a sample NC program if you have one.
Review and quoteOptiTech confirms the scope and replies with a price.
DeliveryPostprocessor, setup notes and support within the agreed scope.

Frequently asked questions

Which CAM software is this postprocessor for?

Siemens NX CAM only.

Which codes does the post output on Haas?

Standard Haas codes for this machine type. Work offsets: G54–G59; Dynamic work offset (DWO) for 3+2 positioning: G254; Tool center point control (TCPC): G234; Drilling canned cycles: G81–G89. Exact codes and options are confirmed against your machine during technical review.

Can the post be adapted to my machine options and shop standards?

Yes, within the agreed scope. Send your controller version, machine options (for example probing or rotary-axis limits) and a sample NC program. OptiTech reviews the configuration before quoting.

How do I get this postprocessor?

Click "Get a quote" on this page and describe your machine and controller. OptiTech replies with the scope and price after technical review.